ACCESSORIES

Self-Tightening Pull Clamps With Bolt

AEK 182
Swivel Clamp
Jaw Capacity: 110mm
Weight: 4.5kg
AEK 183
Right-angle Clamp
Jaw Capacity: 110mm
Weight: 3.1kg
AEK 232
100mm Pull Clamp
Jaw Capacity: 100mm
Weight: 2.7kg
AEK233
45mm Pull Clamp
Weight: 1.3kg
AEK236
Pull Ring for Clamps AEK 232 or AEK 233
Weight: 0.8kg
 
AEK 105
Pull Yoke for Clamps AEK 183, AEK 232, AEK 233
Weight: 0.8kg


 

 
97 403
Split Clamp. Powerful pull clamp which can be used to pull chassis leg members directly forward. Also suitable for pulling floor pans and other heavy panel sections. Dimensions: 200x 100 x 80mm
Weight: 2.8kg

AEK 245
Light-Duty Split Clamp. Similar to clamp 97 403, but dimensions are suitable for side members of lightweight vehicles. Dimensions: approx. 200 x 60 x 80mm
Weight: approx. 2.0kg


 

 

 

 

 

Sleeve or Wrench required: 19
CN 90 N
Compact Self-Tightening Clamp. For one or two pulls in
one or two different directions. Tall, deep jaw (45 x 45mm).
Overall length: 181mm
Overall width: 32mm
Overall height: 160mm
Weight: 1.55kg
Capacity: height: 45mm
depth: 42mm
Bolt: M12 x 100


 

 

 

 

Sleeve or Wrench required: 22
CN 101
Compact Self-Tightening Clamp with flat jaw.
Overall length: 220mm
Overall width: 62mm
Overall height: 40mm
Weight: 1.6kg
Capacity: height: 16mm
depth: 32mm
Bolt: M14 x 70


 

 

 

 

Sleeve or Wrench required: 24
CN 103
Compact Self-Tightening Clamp with high jaw (60mm). Broad gripping area.
Overall length: 230mm
Overall width: 45mm
Overall height: 130mm
Weight: 2.55kg
Capacity: height: 60mm
depth: 30mm
Bolt: M16 x 120

AEK 256
Pull Clamp
Jaw capacity: 60mm
Weight: 3.5kg
Resistance to pull 6t
AEK 256 R
Pull Ring for Clamp
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

 

Self-Tightening Pull Clamps Without Bolt

 

AEK 428
Pull Clamp
with High-Resistance Right-Angle Jaw (60mm).
Jaw Capacity: 60mm
Weight: 3.5kg
Resistance to pull: 6t
AEK 430

Pull Clamp with Wide, High-Resistance Right-Angle Jaw (100mm).
Jaw Capacity: 100mm
Weight: 3.8kg
Resistance to pull: 6t
AEK 431

Pull Clamp with Right-Angle Jaw. The rotation of the pull ring locks the jaws, preventing sliding before the self tightening device is activated.
 
Jaw Capacity: 60mm
Weight: 4.2kg
Resistance to pull: 8t

 
EK 402 T

Wedge Clamp with Self-Tightening Jaws.
Wedge-action jaws grip tighter the harder you pull.
Chain claw pulls chain hooks directly into clamp. The perfect clamp for pulling parallel seam welds.
Goes exactly where you want it to.
Heavy-duty steel casting construction.
Dimensions: 190x80x25mm
Weight: 1.75kg
 
97 200
Scissor Clamp.
Jaw Capacity: 50mm
Weight: 2.5kg
97 300
Scissor Clamp.
Jaw Capacity: 75mm
Weight: 5.5kg

 
97 401
Fast Clamp (without bolt).
Jaw Capacity: 45mm
Weight: 3.1kg
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

 Pulling Accessories

AEK 102
Chain pull yoke
Weight: 4kg
AEK 235
Eye bolt and pull plate
Weight: 2.1kg
AEK 243
Double hook for pulling on bumpers, panels, transverse beams, etc. (4-t)
Weight: 1.4kg

AEK 270
Multi-purpose pull hook for pulls behind door openings, transverse beams, skirts, etc.
Weight: 8kg
Contents:
AEK 269 Pull hook 6kg
D851 101 Wide plate 1.2kg
D852 101 Narrow plate 0.4kg
D853 038 Threaded head 4.8kg
Z21 Lock pin 0.1kg

97272

 

 

 


Deep body hook. Lightweight.
Weight: 9kg
AEK 332

Twin hook.
Weight: 9kg
AEK 301
Pull plate.
Weight: 2.2kg
K121
G-clamp
Weight: 2.2kg
10-ton Chains with One or Two Hooks.
Part No. Length Weight

AEK 103 0.60m 1.6kg
AEK 238 1.20m 3.0kg
AEK 302 2.70m 7.0kg
AEK 307 2.70m 6.5kg
AEK 308 1.80m 4.5kg
AEK 327 2.10m 5.9kg
AEK 328 2.10m 5.9kg
10-ton Chains with One or Two Claws.
97 691 2.70m 6.5kg
97 692 2.70m 7.0kg
20-ton Chains with One Hook.
Z218
K 178264

Chain lock head.
For use with Power-Pro, Mitek, Korek.
Weight: 1.7kg
97 605
Universal pulley. Helps you achieve precise directional control in certain corrective pulls, especially when pulling straight out or straight down. Can be used with most straightening systems. Used for the following applications:

- to deliver downward pulls
- to guide pulls
- to double pull capacity (using pulley block)
Dimensions: 275 x 100 x 75mm
Pulley diameter: 100mm
Weight: 3.6kg
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

 

Safety Cable

AEK 99
 
 
Safety Cable. Holds chains and pull clamps securely in the event of poor grip or collapse of steel sheet.
Weight: 1kg
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

Pushing Accessories

AFZ 1041
SNAP wide-angle wedge head for use with SNAP tube connector FZ1050.
Weight: 3kg
 
65 644

125mm SNAP flex head for use with SNAP tube connector FZ1050.
Weight: 2.2kg
SNAP Extension tubes.
Part No.
K 239900 125mm SNAP Extension tube 1.4kg
K 240900 250mm SNAP Extension tube 2.2kg
K 241900 450mm SNAP extension tube 2.7kg
K 242900 710mm SNAP extension tube 4.1 kg
K 830 901
Push converter for use with Power-Pro, Mitek, Korek.
Weight 3.9kg
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

 

 Door Apperture Holding And Reforming Accessories

 

AEK 110
Twin link restraint.
Weight: 1kg
AEK 111
Push-pull clamps. Can be attached to push or pull
rams and used for precise aperture re-formation (pair).
Weight: 4.5kg
AEK 112
Door struts for 2- and 4-door cars (1).
Weight: 5.5kg
AEK 112-2
Door struts for 2- and 4-door cars (pair).
Weight: 11kg
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

 

 

Sill And Pinch Weld Clamps

AEK 130

 
Dual height sill clamps (pair).
contents:
AEK 229 right side
AEK 230 left side
Weight: 11kg
AEK 133
 
 
Right-angle sill clamps (pair).
Weight: 16kg
AEK 135
 
 
Spread load sill clamps (pair).
Weight: 19kg
AEK 136
Pinch weld clamps for Peugeot 205 Turbo.
Weight: 19kg
AEK 137
Short pinch weld clamps (pair).
Weight: 14kg
AEK 148

Set of 4 short pinch weld clamps.
See also AEK 838.
These clamps are used for the repair of Audi 100 and Audi 80, 1987 models.
Weight: 22kg
AEK 154
Set of 4 anchoring clamps for Porsche 944.
Full clamp set for use of various straightening systems such as Korek, Mitek, P-188, etc.
Dimensions (one clamp):
240 x 210 x 60mm
Weight (one clamp): 4.9kg
AEK 157-4
Set of 4 clamps for Peugeot.
Weight: 42kg
AEK 157-4AK
Clamp adaptor plate for Peugeot when used with Korek¨.
Weight: 16kg
AEK 157-4AT
Clamp adaptor plate for Peugeot when used with tube system.
Weight: 10kg
AEK 152
Set of 8 anchoring clamps for VW Transporter. They are mounted on body of clamp model
AEK 130 or AEK 137.
Their angle matches that of the vehicle's pinch welds.
Dimensions (one clamp): 120 x 100 x 60mm
Total weight of set: 9kg
AEK 151 (not illustrated)
Set of 8 anchoring clamps for Rolls Royce models. They are attached to the body of clamps AEK 137.
Dimensions (one clamp): 120 x 100 x 60mm
Total weight of set: approx 11kg
AEK 156-4
Set clamps for Alfa Romeo.
Weight: 24kg
AEK 158-2
Set of 2 standard short clamps.
Weight: 10kg
AEK 159-2
Set of 2 standard long clamps.
Weight: 10kg
AEK 834
Short anchoring clamps (pair).
For use with support stands AEK 833.
Weight: 13kg
AEK 835

Long anchoring clamps (pair).
For use with support stands AEK 833.
Weight: 22kg
AEK 838
Set of 4 anchoring clamps for Audi 100.
For use with support stands AEK 833.
Weight: 28kg
AEK 838-2

Set of 2 anchoring clamps.
Weight: 14kg
96609
Citroen CX pinch weld clamps (pair).
Weight: 10kg
 

 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

 

Anchoring Accessories
AEK 145
Cross tube anchor set.
Contents:
AEK 146
Cross tube clamps (pair). Also serves as anchoring device.
AEK 147
Chain positioning loop (for mounting on Dozer¨ and Pro-Power¨ anchoring device pin).
AEK 327
2.10m chain with one hook
Weight:
AEK 145 11.0kg
AEK 146 3.1kg
AEK 147 1.8kg
AEK 327 5.8kg

AEK 155A
Mercedes telescopic anchoring bar.
Anchoring set AEK155A is complete and ready for mounting directly onto your Blackhawk¨ straightening system. Suitable for the following Mercedes models: W116, W123, W124, W126 and W201.
Maximum length: 1810mm
Minimum length: 1570mm
Weight: 24kg
AEK 837
Chain tensioner. For use with clamps
AEK 834 and AEK 835 on Korek.
Weight: 5kg
AEK 836

Chain tensioner. For use with clamps
AEK 834 and AEK 835 on Mitek¨.
Weight: 4.2kg
97 530
Chain tensioner.
For use with single or double chain set ups. Anchors vehicle firmly when using Mitek or Korek systems.
Prevents twisting chains; can be used for light pulling jobs. Heavy-gauge steel construction.
Maximum length: 450mm
Minimum length: 355mm
Diameter: 60mm
Weight: 3kg
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

 

Support Stands

AEK 310
Stand with pin-locking device. For use with Dozer.
Weight: 4.1kg
AEK 832
Roller stands for mounting on hubs (1).
Weight: 9.5kg
AEK 833
Adjustable support stand with fixed clamp (1).
Weight: 9kg
AEK 3060
Support stands (pair).
Weight: 15.2kg
AEK 3061
Support stands (pair).
Weight: 7.6kg
AEK3060 and AEK3061 are used with Dozer and Power-Pro.
K 296 900
Support stands for Korek and Mitek.
Weight: 14kg
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

 

Mcpherson Caster And Camber Correction Plates

 

Built and thoroughly tested by body men before being put on the production line, the AEK 225 not only does the job properly, but meets all requirements of collision damage repair experts:
- perfect pull angle.
- pull is carried out at exact level of strut heads.
- fits all type of strut heads.
- adjustable to diameters of different types of suspension.
- no damage can occur when tightening the accessory or carrying out a pull.
- components are of robust construction and do not bend.

 

Complete
AEK 225
Composed of 6 precision made components to guarantee efficiency without damaging McPherson Strut heads.
Weight: 6.820kg
Dimensions: 210mm length
150mm width
160mm height
AEK 269
Accessory with pull hook.

 

 

Citroen BX
Optional components used with AEK 225.
AEK 225 R 25
For small diameter ie: Renault 25
AEK 225 A 100
For large diameter ie: Audi 100
AEK 225 BXM
ie: Citroen BX, XM
AEK CLIO
ie: Renault clio
AEK 225 P605
i.e: Peugeot 605
AEK 225 P306
AEK 225 P106
AEK 225 SAFR
i.e: Renault Safrane
AEK 225 ZX
i.e: Citroen ZX, Mazda, 323 Mod. BG-F
AEK 225 XAN
i.e: Citroen Xantia
AEK 357
i.e:Fiat Punto, Tipo, Tempra, Alfa Romeo 145, 155, 146
AEK 358
i.e: Lancia Delta, Dedra, Renault Twingo
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273

 

Engine Holder

B 024
 

Adjustable engine holder.
Weight: 15kg
 

Contact us / Accessories / BlackoSpace / Company Profile / Korek /

Korek4000 / Literature / MultiRack / Powercage / HD71 /

News / P-188 / Power-Lok / Shark / Training / WebMaster

 

Contact Blackhawk:

e-mail: sales@blackhawk.co.uk 

Tel: 01303 270273